FAA pauses router installations nationwide after tech issue caused Friday's ground stop
The disruption occurred during a telecommunications upgrade replacing obsolete copper wires with fiber optic cables
Fiber optics, copper wires ‘do not mix well’: Former FAA senior executive
Former FAA senior executive Michael O’Donnell discusses the fallout from a nationwide ground stop as airlines work through a backlog of delays on ‘The Claman Countdown.’
The Federal Aviation Administration (FAA) is pausing the installation of new routers across its thousands of telecommunications hubs throughout the country after a tech issue caused the agency to issue a nationwide ground stop on Friday.
The FAA's installation pause will remain in effect while it investigates what went wrong on Friday with the installation of equipment at its facilities and led to the cancellation or delay of thousands of flights. FOX Business confirmed the news, which was first reported by The Wall Street Journal.
L3Harris, the contractor responsible for maintaining the decades-old FAA telecommunications infrastructure, installed a new router at a radio transmitter site in Arkansas on Friday.
Officials said this new router began sending out too many connection signals at once, overwhelming the network and interfering with the ability of air traffic controllers to communicate with airplanes in the sky, prompting the FAA to issue the ground stop.
WHO IS L3HARRIS, THE FEDERAL CONTRACTOR SEC DUFFY SAYS MAY HAVE CAUSED THE FAA OUTAGE?

The issue with the FAA's telecommunications system caused a nationwide ground stop on Friday until it was resolved. (Jacek Boczarski/Anadolu via Getty Images)
The FAA's review led it to identify the router in Arkansas and another in Texas as causing the issue, which prompted officials to isolate those routers to stabilize the air traffic system.
In addition to pausing new router installation, the FAA has disabled the broadcasting functionality believed to be the initial cause of Friday's disruption on more than 60 similar routers.
DUFFY SOUNDS ALARM OVER AGING FAA SYSTEM AFTER NATIONWIDE AIR TRAVEL SHUTDOWN

The issue disrupted the ability of some air traffic controllers to communicate with airplanes in the skies. (Graeme Sloan/Bloomberg via Getty Images)
The installation of new routers has been part of a push to overhaul the FAA's communications system, replacing obsolete copper wires with fiber optic cables to modernize the system and improve its reliability.
L3Harris released a statement on Saturday saying that it is supporting the FAA in its investigation to understand the conditions that led to the Nov. 13 ground stop.
MONDAY AIR TRAVEL FACES KEY TEST AFTER FAA GROUND STOP AS POSSIBLE CAUSE EMERGES

Transportation Secretary Sean Duffy discussed the ground stop at press conferences on Friday and Saturday. (Reuters/Eric Lee TPX IMAGES OF THE DAY)
The company's statement noted that L3Harris, its telecommunications partners and the FAA have completed more than 70% of the planned airspace communication conversion from legacy copper wires to a fiber optic system.
The FAA said in a questions and answers document published on Sunday that the ground stop led operators to cancel about 12,462 flights, including 9,082 cancellations by major airlines out of an abundance of caution, though not all of those were directly caused by the ground stop.
CLICK HERE TO DOWNLOAD THE FOX NEWS APP
FOX Business Network's Grady Trimble and Fox News Digital's James Cirrone contributed to this report.




















