Revisiting my 3D printing takedown

By Barry RandallCovestor

Two years ago, I took a long look at the 3D printing industry. It was a time of great hope for 3D printing, with the advent of newer, cheaper models like those offered by MakerBot.

It was an exciting time for shareholders in companies like 3D Systems (DDD) and Stratasys (SSYS), whose stock prices had risen considerably in 2012; and it was exciting for investment bankers, as they prepared to take Voxeljet (VJET) and ExOne (XONE) public in early 2013.

Continue Reading Below


But after I analyzed the industry and its investment opportunity, I came to two conclusions.

First, that the stock prices of DDD, SSYS carried premium valuations that seemed to reflect that a mass consumer market for 3D printing was just around the corner. I said, “no way.”

Secondly, the state of the 3D printing industry/ecosystem in early 2013 eerily resembled the mini-computer business in the 1980s.

Back then, Digital Equipment, Wang Labs and Apollo Computer were whistling past the graveyard as cheap ‘WinTel’ PCs destroyed their businesses from the inside out.

3D Systems and Stratasys were making the bulk of their revenue and profit from $100,000 machines and consumable resins. So I wondered two years ago how long their profit margins could hold up with dozens of capable machines being offered for as little as $1,000?

3D landscape

For merely suggesting that all was not rosy on 3D Planet, I was subjected to all manner of abuse by readers. I was flat-out “wrong.” I was “narrow in thought and short-sighted.”

There was “nothing positive to say” about my conclusions. But let’s see now how short-sighted I was. Or wasn’t.

First off, then as now, I fully understand the importance of 3D printing to the world of commercial manufacturing. In short, there’s been a revolution in the way product development takes place, enabled by the rapid prototyping of pre-production parts.

Moreover, 3D printing has enabled the manufacture of low-volume parts, like turbine blades, where traditional processes were inadequate to the task.

Mass market illusion

But the mass market and the assumed huge increase in revenue and profits that would have justified premium multiples have failed to arrive. According to market research firm Gartner, only about 108,000 3D printers were sold worldwide in 2014.

That’s one printer for every 65,000 people on earth. By comparison, 2014 global mobile handset sales totaled 2.1 billion – or roughly 19,400 handsets for every 3D printer. Even IDC, which is extremely excited about 3D printing, expects only 310,000 3D printers to be sold in 2017.

So let’s look at the trajectories of the two major publicly-traded 3D printing vendors, DDD and SSYS since I wrote my column.

In mid-January 2013, the consensus estimate for Stratasys’s 2013 earnings per share was $1.93. At that time, SSYS shares were trading at $86, giving the company a one-year forward P:E multiple of 45.

As I write this in mid-January 2015, SSYS is expected to earn about 50% more ($2.94) in 2015, but its valuation has collapsed to a forward P:E of only 26.3. At about $77/share, SSYS shares are lower now than they were two years ago.

Lackluster returns

In fairness, SSYS shares have been higher during the intervening two years, but nonetheless are lower now. By comparison, the S&P 500 is up 38% in that time frame.

3D Systems has fared even worse. Two years ago it traded at $63/share with a forward multiple of 40.5. Today its multiple (26.3) and its earnings expectations have collapsed and the company trades at only $32/share.

I’m not going to take a victory lap over this. As I noted, prices for these stocks have been higher in the past two years. Maybe you somehow managed to buy low in 2012 and sell high two years later.

If so, then good for you. No, the takeaway for investors is how a decaying high valuation becomes a return-killing headwind when over-the-moon expectations aren’t fulfilled. Even for companies like Stratasys whose earnings have actually increased.

And unless you’re particularly good at market timing, you’re probably going to lose money in that scenario.

So what about my other assertion: that the emergence of capable yet far less expensive 3D printers would cannibalize higher-end “enterprise” models? It’s fair to say the jury is still out on that dynamic.

I’m supported in my belief by Gartner, which in an October 2014 industry report wrote it expects “more organizations [will] employ low-end and midrange printers for testing and experimenting.”

Specifically, Gartner believes such experimentation will cause the sub-$1,000 3D printer segment to grow from 11.6% of the market today to 28% by 2018.


// ]]>

Subscribe to our once-weekly email newsletter and get the best posts delivered to you in one convenient place, to browse at your leisure:

Photo credit: Keith Kissel via Flickr Creative Commons//

DISCLAIMER: The investments discussed are held in client accounts as of December 31, 2014. These investments may or may not be currently held in client accounts. The reader should not assume that any investments identified were or will be profitable or that any investment recommendations or investment decisions we make in the future will be profitable. Past performance is no guarantee of future results.

The post Revisiting my 3D printing takedown appeared first on Smarter InvestingCovestor Ltd. is a registered investment advisor. Covestor licenses investment strategies from its Model Managers to establish investment models. The commentary here is provided as general and impersonal information and should not be construed as recommendations or advice. Information from Model Managers and third-party sources deemed to be reliable but not guaranteed. Past performance is no guarantee of future results. Transaction histories for Covestor models available upon request. Additional important disclosures available at