September 27, 2011 – By Scott Malone
Continue Reading Below
NISKAYUNA, New York (Reuters) - An old joke contends that a sculptor's job is easy: To make a statue of an elephant, just take a block of stone and cut away everything that doesn't look like an elephant.
A few major U.S. manufacturers, including General Electric Co <GE.N>, are ready to try the opposite approach, building parts for heavy equipment from jet engines to ultrasound machines through a layer-by-layer process they call "additive manufacturing."
The approach saves time, materials and money and could set the stage for performance breakthroughs as engineers find they can design components that previously would have been too complicated to mass manufacture.
Additive manufacturing, also called "3-D printing," is not an entirely new technology. The technique has been around for two decades, but companies have primarily used it to quickly make prototypes of new products or to produce one-of-a-kind items like custom-fit hearing aids.
GE and its rivals including United Technologies Corp <UTX.N> are now adapting the technology to work in applications including jet engines, which require highly engineered metal parts able to stand up to extreme heat and pressure.
Continue Reading Below
"The potential is huge from the standpoint of design flexibility," said Todd Rockstroh, a consulting engineer at GE's aviation arm, which is the world's largest maker of jet engines. "You can literally design and manufacture things that are generally unmanufacturable today.
RISING FROM A BED OF POWDER
GE, the largest U.S. conglomerate, is working on the technology at its main research lab in Niskayuna, New York, outside Albany. There, engineers are using it to produce nozzles that will be used to spray fuel into jet engines through a process called "powder-bed manufacturing."
It works by laying down a thin layer of powdered metal -- cobalt chrome in this case -- and running a beam of computer-controlled laser light over it, which heats the powder enough to weld it into the shape of the first layer of the nozzle. When that layer cools, more powder is laid down, the laser makes another pass and slowly builds the shape up to its full size -- the nozzle itself is about the size of a very narrow computer mouse.
Additive manufacturing's name highlights the contrast between the technique and traditional manufacturing, where many engineered parts start out as blocks of metal that machinists grind down into the shapes they need.
The new technique cuts costs by several thousand dollars on a roughly $4 million engine by Rockstroh's estimate. It works in two ways, first turning what had been a complicated process of welding together 15 to 20 tiny parts into a two- to three-step procedure. Second, it saves raw material by not grinding away chips of metal that are not longer suited for use in jet engines.
The nozzles will be used in a jet engine GE plans to begin making in 2014.
Prabhjot Singh, the GE lab manager who has been working on the technique, said the main breakthrough was being sure the additive process could consistently produce parts that were dense enough to hold up inside a jet engine.
"The process was never this precise," Singh said on a recent tour of his lab. "Sure you could make show-and-tells, but when you are talking about the aviation industry, these parts are safety-critical."
Even advocates of the technology say that it will only be used in limited cases -- GE will likely never produce an entire gas turbine in one pass, Singh said.
HOLDING DOWN SOARING METAL COSTS
While saving labor and allowing engineers more freedom in their designs is part of the appeal of the additive approach, its advocates said that saving on raw materials costs is also a big part of the appeal, and with good reason.
Rising demand in rapidly industrializing China and India has driven metal prices sharply higher in the past few years. Copper and steel have more than doubled in price since early 2009 as measured by trading in their futures.
"Material is getting more expensive by the day," said Tahany El-Wardany, principal engineer at United Tech.
The Hartford, Connecticut-based company uses the technology for making prototypes but does not yet believe it is ready for use in actual engines, said Agnes Klucha, an engineering manager at United Tech's Pratt & Whitney division.
El-Wardany estimated the additive approach can cut a manufacturer's raw material use on a given piece by 50 to 80 percent, depending on the design.
That sort of cost savings will eventual catch Wall Street's eye, one analyst said.
"Every little bit helps toward lowering the overall costs of the product," said Daniel Holland, an equity analyst at Morningstar in Chicago, who follows GE. "You'd expect the company to continue to evolve and figure out better ways of doing things such that they can save investors money and push the margin profile of the business a little higher."
The hurdle is how effective it will prove in producing the huge volumes of parts that big manufacturers need.
(Reporting by Scott Malone in Niskayuna, New York, editing by Dave Zimmerman)